Armed Polite Society

Main Forums => The Roundtable => Topic started by: Paddy on October 27, 2007, 06:46:08 PM

Title: Reloading components
Post by: Paddy on October 27, 2007, 06:46:08 PM
Why is it so hard (impossible) to get bulk .223 55gr and .308 147, 150, 168, gr. bullets?
Title: Re: Reloading components
Post by: Balog on October 27, 2007, 07:58:00 PM
Uhh, maybe it's thought people will buy the cheap mil surp stuff in those weights instead of rolling their own?
Title: Re: Reloading components
Post by: Paddy on October 27, 2007, 08:11:46 PM
Quote from: Balog on October 27, 2007, 06:58:00 PM
Uhh, maybe it's thought people will buy the cheap mil surp stuff in those weights instead of rolling their own?

Great.  Where can I purchase the 'cheap milsurp stuff'?  And is it boxer primed? (otherwise I'm not interested).
Title: Re: Reloading components
Post by: Balog on October 27, 2007, 08:23:41 PM
Most mil surp is boxer but crimped primers. You need a tool to uncrimp the primer pocket; Dillon sells em pretty cheap. I think, I've never reloaded. Just been around so much gun stuff I've sorta picked up things here and there.

And what are you meaning by bulk?

Cabela's sells em by the 500.
http://www.cabelas.com/cabelas/en/templates/product/standard-item.jsp?id=0012707213383a&navCount=6&podId=0012707&parentId=cat20843&masterpathid=&navAction=push&cmCat=perf&catalogCode=IH&rid=&parentType=index&indexId=cat20843&hasJS=true

Oh, I know what I was thinking of.... in the back of Shotgun News there is always a couple ads for bullets in mil cals with slight pull marks. IIRC they sell em by the thousand.
Title: Re: Reloading components
Post by: Balog on October 27, 2007, 08:32:47 PM
Ok, here's a link. Lots of once fired bulk brass and such too.

http://listings.shotgunnews.com/gunad/category/S5800

Quote
SS109 M-855 BULLETS, 62 GR New US Manufacture, never loaded $45 per thousand. We have some with slight marks that were pulled from ammo for $35 per thousand. M-193 FMJ, .223, 55 gr. Slight marks, sized and polished $26 per thousand. .223 M-196 Red tip Tracer $35 per thousand. .223 M856 62 gr. orange tip tracer $160 per thousand. Dan or Steve 800-468-8617. www.hi-techammo.com

Title: Re: Reloading components
Post by: Bogie on October 27, 2007, 11:17:43 PM
They Hueys are good guys, and semi-local to me - They do great components. If you've been to Knob Creek, you've probably seen their table, and if you shot rentals, there's a good chance that the gun was theirs...
 
Title: Re: Reloading components
Post by: Brad Johnson on October 29, 2007, 11:03:01 AM
I'd be a little leery using milsurp brass. They tend to vary a lot in case capacity.  That can cause pressure problems unless you're careful.

Brad
Title: Re: Reloading components
Post by: Fly320s on October 30, 2007, 02:18:02 AM
Quote from: RileyMc on October 27, 2007, 05:46:08 PM
Why is it so hard (impossible) to get bulk .223 55gr and .308 147, 150, 168, gr. bullets?

Probably the same reason it's hard to get loaded ammo in those same bullet wieghts: supply and demand.  Right now the military is demanding most of the supply.  Not much left to sell retail.