Armed Polite Society
Main Forums => The Roundtable => Topic started by: marvo71 on March 19, 2017, 06:00:05 PM
-
Hello everyone, i noticed a thread a while ago about someone who could not get in there safe, I have the same one, a Pheonix Centurion 1200. I have my keys but cannot remember my code? arrrrgghhh!
-
Have you tried calling the factory? I don't know if you have a serial number visible, or if they would accept your word that it's yours. Otherwise it's time for a locksmith.
If you've had your safe for some time, just leave it alone for awhile. The combination may come back to you. That happened to me last year.
-
Chees, thank you, i just didnt know if there was a generic code or something, not really into safes, i was recomended to get it.
-
Det cord
-
Hello everyone, i noticed a thread a while ago about someone who could not get in there safe, I have the same one, a Pheonix Centurion 1200. I have my keys but cannot remember my code? arrrrgghhh!
You can impression or pick to get the key, but the combo is a bit harder. Locksmith is most likely to just drill.
I'd give it a couple weeks unless you need quick access. See if you remember the combo. If you do, put a copy in a safety deposit box. Otherwise, locksmith unfortunately is your best bet.
-
Know any Russians?
-
So you CAN get in the safe using the keys?
Well if you can get in the safe, but you can't remember your code, it should be fairly simple for a factory-authorized locksmith to reset the dial code to whatever you want it to be.
-
My pistol safe uses a combo and a 4 bladed key. You MUST use BOTH to gain access. His may be the same way.
(https://armedpolitesociety.com/proxy.php?request=http%3A%2F%2Fherohog.com%2Fimages%2Fguns%2FSentrySteal-SafeV330m.jpg&hash=0296abc8c74dbd861a11c5b6877157e439d64820)
On mine, an old Sentry Steal-Safe V330m I bought years back, the combination is a bit strange as well. I wrote an obfuscated copy of it on the edge of the Rifle cabinet door (Homak double Coke Key locking 8 Gun Security Cabinet (https://www.homak.com/HTML/SecurityCabs.html)) just in case I forget the numbers. The Homak unit is "Ok" but even bolted to the wall can be defeated by a pry bar. I mount mine in a small closet in the narrow side where getting a good pry would be VERY difficult. The pistol safe is bolted to the top of the Homak and that sucker weighs a TON and would be VERY difficult to open I would imagine.
:old:
-
"My pistol safe uses a combo and a 4 bladed key. You MUST use BOTH to gain access. His may be the same way."
Oops.
I have the combinations for both of my gun safes in places where I'll know exactly what they are, but which are not at all apparent as to what they are.
-
Det cord
WHEW. So glad someone already provided the proper answer.
-
I have the combinations for both of my gun safes in places where I'll know exactly what they are, but which are not at all apparent as to what they are.
That's how mine is stored. To see it in the places I have it, you wouldn't know what it is or how to decode it and trust me, this safe is PICKY as all get-out about exactly how the combination is entered even when you know it! I have sat there for long periods of time trying to get it in right when I HAVE IT IN MY HAND! Oh, this dial has 2 "stop lines," goes from 0 to 99 and you have to get the dial dead on the numbers for it to work. It is NOT a quick access type unit but it IS pretty dang secure!
-
Both my American Security Products and my Ft. Knox are picky, but not quite that picky.
There's probably a number's worth of slop on either side leeway for each number...
22 17 19
would be
21-23 16-18 18-19
or thereabouts.
-
I have the combinations for both of my gun safes in places where I'll know exactly what they are, but which are not at all apparent as to what they are.
^^^^^This.
-
Well thank you to every one!!!!!! Guess what.....it opened!!!!!!! I put the key in and gave it a wiggle, played with the dial and then i noticed that the door opened by about 2mm, so i got a thick screwdriver and prised the door open, the bars were not all the way into the safe itself!!!!!
But now i have another problem, how do i change the code to one i rememebr now?
Once again, i thank you to everyone who helped me. =)
-
http://www.safe-cracker.co.uk/safe_opening/phoenix_safe_opening.htm
http://www.free-instruction-manuals.com/pdf/p4767235.pdf
http://www.safelincs-forum.co.uk/topic/3926-how-to-change-the-passcode-on-phoenix-1262/
Hope that maybe some of that might lead ya in the right direction...
-
Well thank you to every one!!!!!! Guess what.....it opened!!!!!!! I put the key in and gave it a wiggle, played with the dial and then i noticed that the door opened by about 2mm, so i got a thick screwdriver and prised the door open, the bars were not all the way into the safe itself!!!!!
But now i have another problem, how do i change the code to one i rememebr now?
Once again, i thank you to everyone who helped me. =)
Was the door being faulty? That the bars weren't retracting as they should? If so and if the door is removeable, take it off and take it to a safe company for servicing. Lot of smaller safes are, including my smaller one that I use for documents. Makes it easy to service. Just repainted mine.