The rolled vinyl flooring options are quite attractive. Completely non-porous, one-piece. . .
Went looking at vinyl today. Do not want. Don't like the look or texture. Wood laminate is what I'll likely go with, specifically the kind that snap together and do not need to be glued down. It's held down by being interlocked, and by the edging. Not a fan of the fact that it has cracks (which can and will soak up liquids), but I'm pondering if I can put some clear coat on top of it.
Looked at tile. Do not like cleaning grout. So it'll probably be some stone looking linoleum for the bathroom.
Started hanging up tools on the primary peg board (4x12, I believe). Need more pegs, so a trip to Harbor Freight is in order.
Took off the shelving in the far left of the above photo. The rails will be slightly more difficult to remove. It's only nailed in place, but ye Gods is it securely nailed in place. Not a biggie. Windows and baseboard are painted now. Picked up stainless steel cover plates for electrical outlets and light switches. Did second primer coat after sanding. Still need to do on top and undersides of the cabinets. It's not visible under normal circumstances, but I still want to do a thorough job. Will wait a while and thoroughly sand before putting semi-gloss on.
And swept the floor a bit because some folks commented on it.