Armed Polite Society
Main Forums => The Roundtable => Topic started by: freakazoid on April 08, 2017, 01:15:51 AM
-
I just read in a Facebook group that CMP put out that they are getting 86,000 M1 Garands that were sent as a lend-lease to the Philippines.
-
I may have to grab another.
I'm still hoping those 1911's come through...
-
I'm hoping the M1 Carbines in S. Korea can come home, too. Man, them's fun little guns.... and that's their "sporting purpose."
Fun.*
Terry
*( >:D Oh, and for practice in clearing jams and using curse words. Ideal for youth and female training in the true ways of the world. :D)
-
That would be awesome. The selection has gotten pretty slim. I had also been thinking about getting another one, mostly for investment.
On a side note, I'm trying to remember what Obama did to put the kibosh on getting more of them back into he hands of the CMP. Was it something Trump could easily reverse?
-
If "another one," you mean Carbines, I believes it has to do with a State Department or BATFABCXYZ "interpretation" of "sporting purpose."
I.e., excluding just about everything but deer and duck and paper huntin'.
Same may be true of the Garands.
And notwithstanding that, I believe both M1s are classed as curios and relics.
We need overhauls of both the State Department and the BATFEABCXYZ.
With the Philippine M1 Garands, at least they're owned* by a U.S. protectorate (or whatever) as opposed to the M1 Carbines in South Korea, where we are still technically "in conflict" with N. Korea over that little kerfuffle in the 1950s. (Maybe it's a good idea to leave them there after all --who knows?)
Terry
* or at least lend-leased to them.
-
If "another one," you mean Carbines,
Meant Garands, being in CA. Grrr. I had a sweet Singer M1 carbine in the 80s that was stolen. Double Grrr.
Yeah, my last one I just used my C&R to meet the CMP requirements. I gave the C&R up though, so I guess if I get another Garand I'll need to go to the range and do a dang shoot.
-
Oh, I got the hots for a CMP Garand a couple of years ago, gathered copies of my NRA Life card, CCW, Hunter Safety Certificate, Membership in my range, Handgun Hunting Tester ticket, etc, etc, (and there was some kind of exemption for age, which I forget what it was) and once again decided I didn't like the clip mechanism anyhow.
The Japs got it right when they copied it, with a detachable magazine and a carrying handle.
You ain't got a clip, you ain't got a rifle. So I gave it up.
Besides, IIRC, they only had them in .308.
-
No clips? Well, if you're dextrous, it's still a single-shot rifle. But it's not like clips are hard to come by.
-
The Japs got it right when they copied it, with a detachable magazine and a carrying handle.
You ain't got a magazine, you ain't got a rifle. So I gave it up.
Besides, IIRC, they only had them in .308.
I guess you will be satisfied only with a blind magazine or tubular magazine? Maybe a single-shot?
-
Now the thompsons from Russia would be neat but don't think we will see those.
-
I did not mean to imply that I would choose a M1 over a modern design for social work. I was just commenting that if you're in the unenviable position of having no clips, you can still use it as a single shot rifle.
-
Now the thompsons from Russia would be neat but don't think we will see those.
Some have come back ... only to have their receivers cut up, and parts sold to concerns that make CNC dummy aluminum receivers, stick the parts on and sell them for use as wall-hangers.
I know...........
I bought one of 'em in 2006. :laugh: [tinfoil] [tinfoil] ;)
-
Some have come back ... only to have their receivers cut up, and parts sold to concerns that make CNC dummy aluminum receivers, stick the parts on and sell them for use as wall-hangers.
I know...........
I bought one of 'em in 2006. :laugh: [tinfoil] [tinfoil] ;)
Uh . . . I trust that wasn't an "80%" receiver sold with some jigs and fixtures . . . :O >:D
-
Uh . . . I trust that wasn't an "80%" receiver sold with some jigs and fixtures . . . :O >:D
The receiver is not milled out to accept the bolt and recoil spring, nor does it have an appropriate ramp in the front for the round to ride upon. Maybe .... maybe ... if you did an enormous amount of machining. you could possible hollow it out correctly. What you have as is is essentially a solid aluminum block with two threaded screwholes on bottom where it was attached to a mandrel for original CNC cutting.
Plus it's aluminum. Originals were steel.
I'm really not expert enough to know what all would really be necessary to make it into a working thing, or if a Thompson with an aluminum receiver is even a desirable thing.
I sure won't be trying it.
There are better weapons out there anyway.....if I wanted to "go rogue" I hardly need a sorta working recommissioned aluminum Tommy Gun when I have lighter more powerful weapons I know will work. >:D
But it IS a cool wall hanger! :angel: ;)