Armed Polite Society

Main Forums => The Roundtable => Topic started by: Scout26 on September 05, 2012, 05:28:53 PM

Title: Nick, Bogie....A home decorating project:
Post by: Scout26 on September 05, 2012, 05:28:53 PM: (https://sphotos-a.xx.fbcdn.net/hphotos-snc7/3838_10151152288698464_1227053474_n.jpg)

=D =D =D
Title: Re: Nick, Bogie....A home decorating project:
Post by: vaskidmark on September 05, 2012, 06:41:44 PM: Are those stilleto slippers?

stay safe.
Title: Re: Nick, Bogie....A home decorating project:
Post by: Jamie B on September 05, 2012, 07:20:27 PM: Wow, are you going to get your Man Card punched for that!
Title: Re: Nick, Bogie....A home decorating project:
Post by: Nick1911 on September 05, 2012, 07:32:38 PM: Quote from: Jamie B on September 05, 2012, 07:20:27 PM
Wow, are you going to get your Man Card punched for that!

Only if the cylinders are full.

of chlorine triflouride.
Title: Re: Nick, Bogie....A home decorating project:
Post by: MrsSmith on September 05, 2012, 09:33:43 PM: I could see the grill as a foot board, but the cylinders are just ugly.
Title: Re: Nick, Bogie....A home decorating project:
Post by: AJ Dual on September 05, 2012, 10:50:31 PM: Quote from: Nick1911 on September 05, 2012, 07:32:38 PM
Only if the cylinders are full.

of chlorine triflouride.

Meh... etching for semiconductors or as a solvent for reactor fuel? Trying to figure which one would be more suitable for the DIY'er working from his bedroom.
Title: Re: Nick, Bogie....A home decorating project:
Post by: MillCreek on September 05, 2012, 10:55:13 PM: This just screams middle-aged basement dweller who is very protective of his virginity.
Title: Re: Nick, Bogie....A home decorating project:
Post by: Nick1911 on September 05, 2012, 11:29:56 PM: Quote from: AJ Dual on September 05, 2012, 10:50:31 PM
Meh... etching for semiconductors or as a solvent for reactor fuel? Trying to figure which one would be more suitable for the DIY'er working from his bedroom.

Personally, I only do computer work in my bedroom. Chem work takes place ideally in the basement where there is running water and a good drain; or if lots of ventilation is needed, on the porch behind an impressive piece of glass plate, as I lack a proper fume hood.