« previous next »
Pages: [1]

Author Topic: n00b electrical question  (Read 1261 times)

taurusowner

  • Guest
n00b electrical question
« on: July 07, 2009, 04:00:32 AM »
I am trying to install a floodlight with a day/night photosensor that will illuminate a flag as well as a front porch.  I wanted to get one that just plugs into an outlet, since I have numerous outlets on said porch.  But I cannot find one, so I purchased a double floodlight fixture made by Brinks that has a photosensor on it.  It's meant to be hardwired, and has 2 wires pre cut and stripped on the ends, 1 white and 1 black.  I also purchased a 2 prong male plug that has terminals to connect bare wires to on the inside.  The inside terminals are even labeled "black" and "white".  So I attached white to white, black to black and....nothing.  The light doesn't turn on.  New bulbs, new fixture, and what I thought was simple wiring.  Any idea what could be causing this?  I don't know a whole lot about wiring beyond a shop class I took about 8 years ago in high school.

Also, I know it's not the power outlet as other stuff works on it.  I know they are the right floodlight bulbs, because I got the ones recommended on the box for the fixture.  Also there is no AC/DC adapter that I know of.  I'm not sure if that would even be the case.  Aren't wall sockets AC as well as light fixtures?  Why would a conversion even be necessary?
Report to moderator   Logged

taurusowner

  • Guest
Re: n00b electrical question
« Reply #1 on: July 07, 2009, 04:42:52 AM »
Disregard.  Apparently the light isn't supposed to turn on the first time you connect it.  It stays off for about 5 minutes initially, and then activates.
Report to moderator   Logged

Scout26

  • I'm a leaf on the wind.
  • friend
  • Senior Member
  • ***
  • Posts: 25,997
  • I spent a week in that town one night....
Re: n00b electrical question
« Reply #2 on: July 07, 2009, 09:17:45 AM »
I was going to guess that it was daylight out and ......... ;/ ;/
Report to moderator   Logged
Some days even my lucky rocketship underpants won't help.


Bring me my Broadsword and a clear understanding.
Get up to the roundhouse on the cliff-top standing.
Take women and children and bed them down.
Bless with a hard heart those that stand with me.
Bless the women and children who firm our hands.
Put our backs to the north wind.
Hold fast by the river.
Sweet memories to drive us on,
for the motherland.

RoadKingLarry

  • friends
  • Senior Member
  • ***
  • Posts: 21,841
Re: n00b electrical question
« Reply #3 on: July 07, 2009, 09:34:53 AM »
Don't you just hate it when things work exactly like they are supposed to?
Report to moderator   Logged
If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or your arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that you were our countrymen.

Samuel Adams

K Frame

  • friend
  • Senior Member
  • ***
  • Posts: 46,047
  • I Am Inimical
Re: n00b electrical question
« Reply #4 on: July 07, 2009, 09:45:43 AM »
Quote from: scout26 on July 07, 2009, 09:17:45 AM
I was going to guess that it was daylight out and ......... ;/ ;/

My first thought, too...
Report to moderator   Logged
Carbon Monoxide, sucking the life out of idiots, 'tards, and fools since man tamed fire.

taurusowner

  • Guest
Re: n00b electrical question
« Reply #5 on: July 07, 2009, 12:51:12 PM »
To respond, there is a cap you can place on the sensor to simulate constant dark in case you want to have the lights on all the time or connected to a flip switch.  I had this cap on when I tested it.  Light was not an issue.  I looked up the problem online.  Apparently after plugging it in for the first time, you have to give it a few minutes for the "system to stabilize" before it turns on.  This is the first light fixture I've heard of that has a "system" that needs "stabilization".  But whatever, it works now.
Report to moderator   Logged

Strings

  • APS Pimp
  • friend
  • Senior Member
  • ***
  • Posts: 5,195
Re: n00b electrical question
« Reply #6 on: July 07, 2009, 04:26:54 PM »
>This is the first light fixture I've heard of that has a "system" that needs "stabilization". <

Happens sometimes. Buying an upgraded flux capacitor for it will usually eliminate the stabilization problems. So will using the newer dilithium crystal bulbs...














Ok, I know... I'm a bad man...
Report to moderator   Logged
No Child Should Live In Fear

What was that about a pearl handled revolver and someone from New Orleans again?

Screw it: just autoclave the planet (thanks Birdman)

never_retreat

  • Head Muckety Muck
  • friend
  • Senior Member
  • ***
  • Posts: 3,158
Re: n00b electrical question
« Reply #7 on: July 07, 2009, 06:52:07 PM »
Since you kind of home built what you needed, I'll assume that you mounted said fixture on a waterproof box and used a sealing type connector were the cable enters said box. You should use a 3 prong cord though and ground the box. Especially since this is outside.
Also if you used a regular flood holder it should not point up in the air because water will fill up the socket. You should either use a holder that has a lens over the bulb, or what is cheaper would be a rectangular halogen flood light. They make them in the 100 watt range you don't have to use the big 500 watt monsters.
Report to moderator   Logged
I needed a mod to change my signature because the concept of "family friendly" eludes me.
Just noticed that a mod changed my signature. How long ago was that?
A few months-mods
Pages: [1]
« previous next »